ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Cold/Warm Hesitation|Page 819 > < Extended Idling - Engine Overheat or High Idle Speed
Page 1
background image

Idle Speed: All Technical Service Bulletins
Engine - Cold/Warm Hesitation

Article No. 83-7-10

HESITATION (5.0L CFI) - COLD/WARM ENGINE

FORD 1983 FORD, THUNDERBIRD

LINCOLN-MERCURY 1983 MERCURY, LINCOLN, MARK VI, CONTINENTAL

Hesitation during cold/warm engine operation can be serviced by setting fast/curb idle speeds to specification.

NOTE:

Speeds higher than recommended setting result in lean off-idle acceleration fuel enrichment.

1.

Check and reset curb/fast idle speeds to specification shown on vehicle decal.

2.

If curb idle speed reset is more than 50 rpm, the AOD transmission lever (TV) must be readjusted to the procedure in Section 17-20 of the
applicable

shop manual.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION/TIME: Refer to the Labor Time Standards Manual for applicable operation and time.
DLR. CODING: Basic Part No. DRIVE Code: H4

Engine - Cold/Warm Hesitation|Page 819 > < Extended Idling - Engine Overheat or High Idle Speed