LTD Country Squire V8-302 5.0L VIN F TBI (1983)
FIGURE 10
On the C5 transmission, the three (3) bottom pump and converter housing to case bolts (small flange case) were precoated with the sealant to prevent oil
leaks. (Refer to Figure 10 for the location of the bolts.) On the AOD transmission, all the pump to case bolts were precoated with the Dri-Loc sealant.
For this reason, more break torque might be required to remove the bolts.
When service requires removing and reinstalling the bolts, wire brush the bolts and the case bolt holes. Remove as much loose sealant as possible.
Recoat the bolt with either Threadlock and Sealer (Part No. E0AZ- 19554-A), Pipe Sealant with Teflon (Part No. D8AZ- 19554-A), or Teflon tape.
Torque the bolts to specification. (The torque specification has not changed, C5- 28-38 lbs.ft.; AOD-16-20 lbs.ft.).
PART NUMBER
PART NAME
CLASS
E0AZ-19554-A
Threadlock and Sealer
AG
D8AZ-19554-A
Pipe Sealant with Teflon
AG
OTHER APPLICABLE ARTICLES: None
