LTD Country Squire V8-302 5.0L VIN F TBI (1983)
Power Window Switch: Service and Repair
RH Front Door Window Switch
Removal and Installation
Note: Image shows LH Front door housing - RH similar.
1. Remove the screw from the front end of the bezel and lift the bezel and switch away from the arm rest.
2. Remove the bezel and nut from the mirror remote control.
3. Remove two nuts from the bezel studs and separate the switch(es) from the bezel.
4. Pull the switch from the switch connector.
5. To install, position the switch to the connector and press together firmly.
6. Position the switch(es) to the bezel and install the two retaining nuts.
7. Install the bezel and nut on the outside mirror remote control.
8. Position the switch and bezel to the armrest and install the retaining screw.
