LTD Country Squire V8-351 5.8L VIN G Windsor 2-bbl HP (1985)
Compressor Clutch Bearing: Service and Repair
REMOVAL
1. Remove the clutch hub retaining nut. Use spanner wrench T81P-19623-MH, or equivalent, if necessary.
Clutch Hub Removal
2. Remove the hub and shim(s) from the compressor shaft with Tool T80L-19703-B or equivalent. Hold the tool with a 1-inch wrench and tighten the
bolt with a 1/2-inch wrench to pull the hub from the compressor shaft.
Fig. 2 Disassembled view of clutch assembly. FS-6
3. Remove the pulley retaining snap ring.