ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Line, Suspension Control > < Front/Rear Stabilizer Bar Bushings - Squeak/Grunt Noise|Page 4546
Page 1
background image

Air Dryer: Service and Repair

1.

 Disconnect battery ground cable.

2.

 Remove air line from dryer by pushing down on retainer and pulling air line outward.

3.

 Disconnect electrical connectors from dryer, if equipped.

4.

 Remove air compressor, if necessary or dryer-to-compressor attaching screw.

5.

 Remove dryer retainer clip, if equipped.

6.

 Remove dryer and O-ring seal.

7.

 Reverse procedure to install. On 1985 Crown Victoria, Grand Marquis and 1985---87 Lincoln Town Car, torque dryer-to-compressor attaching
screw to 15---25 inch lbs. On 1986---87 Crown Victoria and Grand Marquis, torque dryer-to-compressor attaching screw to 15---25 inch lbs., and
compressor-to-mounting bracket attaching bolts to 30---40 inch lbs.

Air Line, Suspension Control > < Front/Rear Stabilizer Bar Bushings - Squeak/Grunt Noise|Page 4546