LTD Crown Victoria V8-302 5.0L VIN F FI (1986)
Wiper Gear Box: Service and Repair
1982---88
1.
Disconnect battery ground cable.
2.
Remove wiper arm and blade assemblies from the pivot shafts. Remove rear hood seal.
3.
Remove wiper motor and linkage cover for access to linkage.
4.
Disconnect the linkage drive arm from the motor crank pin by removing the retaining clip.
5.
Remove the six bolts retaining the left and right pivot shafts to the cowl, and remove the complete linkage assembly.
6.
Reverse procedure to install.
