LTD Crown Victoria V8-351 5.8L VIN G Windsor 2-bbl HP (1982)
Headlamp Switch: Service and Repair
Headlamp Switch
1982---88
1.
Disconnect battery ground cable.
2.
Under instrument panel, depress light switch knob and shaft retainer button on side of switch and, while holding button in, pull knob and shaft
assembly from switch, Fig. 2.
3.
Unscrew trim bezel and remove locknut.
4.
From under instrument panel, pull switch from panel while tilting downward, disconnect electrical connector and remove switch.
5.
Reverse procedure to install.
