LTD Crown Victoria V8-351 5.8L VIN G Windsor 2-bbl HP (1982)
3.
To check rotor alignment:
A.
Rotate the engine until the No. 1 piston is on the compression stroke.
NOTE:
Verification of being on the compression stroke is essential to correct motor alignment. If the piston is on the exhaust stroke, the rotor
can be misaligned by 180~.
Figure 12
B.
Slowly rotate the engine until the alignment tool can be installed.
a.
On carryover rotors the T78P-12200-A tool mounts between the slot in the upper electrode blade and the slot in the adaptor (Figure 12).
Figure 11
b.
On second generation rotors the T79P- 12200-A tool mounts between the slot on the sleeve and the slot (cut out) on the adaptor (Figure
11).
c.
Read the timing mark on the damper indicated by the timing pointer.
