ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Alignment: > < Multiple Junction Connector|Locations
Page 1
background image

Alignment: Customer Interest
Tires - Outer Edge Wear

Article No. 84-7-5

TIRE WEAR - OUTER EDGE OF FRONT TIRE

FORD 1982-84 CROWN VICTORIA

LINCOLN-MERCURY 1982-84 GRAND MARQUIS, LINCOLN TOWN CAR; 1982-83 MARK VI

Use the following procedure to optimize tire life on the above listed vehicles when the vehicle wheel alignment is within specification and the front tire
outer edge wear is due to a duty cycle consisting of excessive turning maneuvers.

1.

Rotate the tires.

2.

Check and set tire pressure (cold) to the maximum pressure indicated on the tire sidewall.

NOTE:

DO NOT exceed the maximum pressure indicated on the sidewall.

3.

Adjust the front caster and camber as close as possible to + 4~ caster and - 0.25~ camber. Maintain side-to-side caster and side-to-side camber
within +/- 0.75~.

4.

Adjust front total toe to - 1/16 inch (toe-out).

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP1007B84
TIME:

1.3 Hrs. (S1 Locking Lug Nuts - 0.2 Hr.) (S2 Locking Wheel Covers - 0.3 Hr.) DLR. CODING: Basic Part No. FRONT Code: 36

All Technical Service Bulletins for Alignment: > < Multiple Junction Connector|Locations