LTD Wagon V8-302 5.0L (1986)
Evaporator Core Removal
3. Position the evaporator core to the RH half of the evaporator case.
4. Apply Caulking Cord D9AZ-19560-A or equivalent sealer to the case flange and around the evaporator core tubes.
5. Position the evaporator case LH half and dash panel gasket to the case RH half.
6. Install six screws to attach the two halves of the case together.
7. Install a new dash panel seal.
8. Install a new heat shield on the bottom of the evaporator case assembly with staples.
9. Install the evaporator case in the vehicle.
