ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Emission Control System Modification|Page 1244 > < Distributor Plate W/ Pick-up Sensor|Service and Repair
Page 1
background image

Technical Service Bulletin # 86E53

Date: 861201

Recall - Emission Control System Modification

RECALL NUMBER

86E53

Date:

December, 1986

To:

All Ford and Lincoln-Mercury Dealers

Subject:

Emissions Recall 86E53 - Recall of Certain 1981 and 1982-model 4.2L and 5.0L Engine Equipped Ford LTD and Mercury Marquis
Vehicles for Emission Control System Inspections and Modifications

Vehicles Involved, Condition & Correction

VEHICLES INVOLVED

All 4.2L and 5.0L engine-equipped Ford LTD and Mercury Marquis vehicles manufactured during the 1981 and 1982-model years having the following
engine calibrations and engine codes:

MODEL

CALIBRATION

ENGINE

YEAR

ENGINE

CODES

CODES

1981

4.2L

1-18U-R00

BK-886-AA

5.0L

1-20A-R00

BK-306/308-AA

1-20A-R01

BK-306/308-AB
BK-324-AA

1-20B-R01

BK-312/316-AB

1-20N-R10

TK-308-AA (Calif)

1981

4.2L

1-18U-R00

CJ-887-AA
CK-878/888-AA

2-18U-R10

CJ-887-AB
CK-878/888-AB

2-18U-R11

CJ-887-AC
CK-878/888-AC

5.0L

1-20N-R10

2J-346-AA
2K-318/340/324-AA UK-340-AA

DESCRIPTION OF CONDITION AND CORRECTION

In-use studies conducted by the Environmental Protection Agency show that some of the described vehicles may be emitting unacceptable emissions
levels. To correct this condition, the following service procedures are to be performed on all returned vehicles.

^

All 1981-model 49-State 5.0L engine-equipped vehicles will be inspected for exhaust gas recirculation (EGR) valve function.
Non-functioning valves will be replaced.

^

All vehicles will have a vacuum switch assembly adjusted to a new setting.

^

Certain engine calibrations will require either the replacement of existing vacuum retard delay valves or installation of such valves in the air
control valve and/or air bypass valve vacuum hoses.

^

All serviced vehicles will require installation of Authorized Modifications decals. Vehicles having new vacuum retard delay valves installed
must also have new Vehicle Emission Control Information (VECI) decals. The VECI decals for vehicles involved in this action are being sent
directly to the owners. Owners are requested to bring the decals with their vehicles when this service is scheduled to the performed.

Each VECI decal will have a vehicle identification number (VIN) printed on it. If it is necessary to get additional decals, contact your FPSD
District Office and provide the VIN for each vehicle requiring a decal.

^

All service stock of certain vacuum switch assemblies is to be returned for credit. Refer to RETURN OF DEALER SERVICE STOCK in this
bulletin for instructions.

Recall - Emission Control System Modification|Page 1244 > < Distributor Plate W/ Pick-up Sensor|Service and Repair