LTD Wagon V8-302 5.0L VIN M 4-bbl HP (1984)
Water Pump: Service and Repair
1.
Drain cooling system, then remove carburetor air inlet tube.
2.
On models equipped with a fan shroud, remove shroud attaching bolts and place shroud over fan and spacer. Remove fan and spacer from water
pump shaft, then remove fan shroud.
3.
Remove alternator drive belt, A/C drive belt and idler pulley bracket, if so equipped. Remove power steering drive belt and power steering pump,
if so equipped. Remove all brackets from water pump, then remove water pump.
4.
Disconnect radiator lower hose and heater hose at water pump.
5.
Remove drive belt, fan, spacer or fan drive clutch and pulley.
6.
Reverse procedure to install.
