ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Gearshift Cable Adjustment > < Transmission Bearing Cone and Race Inspection

Maverick 2001 (12.2000-07.2004)

Manual Transmission/Transaxle and Clutch - General Information - Clutch System Bleeding Maverick 2001 (12/2000-07/2004)
General Procedures

CAUTION:
CAUTION:To prevent damage do not spill brake fluid onto plastic or painted surfaces.
NOTE:
NOTE:The fluid in the brake master cylinder reservoir must be maintained at the 3/4 level or higher during air bleeding. Be sure to use High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or DOT 3 equivalent fluid meeting Ford specification ESA-M6C25-A.
NOTE:
NOTE:The clutch hydraulic system must be bled whenever a clutch master cylinder, clutch slave cylinder tube or hydraulic clutch hose is disconnected.
  1. Slowly pump the clutch pedal several times.

  1. With the clutch pedal depressed, loosen the bleeder screw to release the fluid and air.

  1. Tighten the bleeder screw.
  1. Repeat Steps 1 through 3 until no air bubbles appear in the fluid.

Gearshift Cable Adjustment > < Transmission Bearing Cone and Race Inspection