ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Procedures|Removal and Installation > < Clutch System Bleeding
Manual Transmission/Transaxle and Clutch - General Information - Gearshift Cable Adjustment Maverick 2001 (12/2000-07/2004)
General Procedures

  1. NOTE:
    NOTE:Make sure that the gearshift lever is in neutral and the parking brake is set.
    If necessary, remove the center console trim and gearshift lever boot.
    1. Remove the gearshift lever knob.
    1. Remove the center console trim and gearshift boot.

  1. Release the gearshift cable adjuster lock.

  1. Release the gearshift cable adjuster.

  1. NOTE:
    NOTE:The transmission is in neutral when the angle between the gearshift lever and the transmission shift lever is 90 degrees.
    Set the transmission in neutral.

  1. NOTE:
    NOTE:Make sure that the gearshift lever is in neutral.
    Push in the adjuster and secure the lock.

  1. If necessary, install the center console trim, the gearshift lever boot assembly and the gearshift lever knob.

General Procedures|Removal and Installation > < Clutch System Bleeding