Midsize LTD L4-140 2.3L SOHC (1986)
Front Crankshaft Seal: Service and Repair
To gain access to the front engine seals, remove the timing belt cover and proceed as follows:
CRANKSHAFT OIL SEAL
1.
Without removing cylinder front cover, remove crankshaft sprocket with tool T74P-6306A.
2.
Remove crankshaft oil seal with tool T74P-6700B.
3.
Install a new crankshaft oil seal with tool T74P-6150A.
4.
Install crankshaft sprocket with recess facing engine block.
CAMSHAFT & AUXILIARY SHAFT OIL SEALS
1.
Remove camshaft or auxiliary shaft sprocket with tool T74P-6256A.
2.
Remove oil seal with tool T74P-6700B.
3.
Install a new oil seal with tool T74P-6150A.
4.
Install camshaft or auxiliary shaft sprocket with tool T74P-6256A with center arbor removed.
