ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Distributor Advance Unit: > < Spark Plug/Coil Wire - Resistance, Manual Correction|Page 1988
Page 1
background image

Distributor Advance Unit: Customer Interest
Engine - Knocks When Cold

Article No. 85-2-7
ENGINE KNOCK - 3.8L - COLD

FORD 1985 LTD

LINCOLN-MERCURY 1985 MARQUIS

CALIBRATIONS: All 3.8L CFI built before 9/19/85

Cold knock is caused by spark advance added during warm-up to improve cold driveaway. This will not cause engine damage. This noise will disappear
as
engine reaches stabilized operating temperature. Basic engine services are not required to correct this condition. Customer concerns can be serviced by
retarding the ignition timing 3~ from the specification.

1.

Verify the initial timing. If the timing is at 7~ BTDC and a 3~ retard rod has already been installed in production, no further service actions are
required.

2.

If initial timing is at 10~ BTDC, install a 3~ retard octane rod in the distributor, part no. E3FZ- 12A335-B.

Authorized Modifications Decal

Obtain an Authorized Modifications decal and list the date, dealer number and summary of alterations performed. Select a prominent place adjacent to
the Vehicle Emission Control Information decal suitable for installing the Authorized Modifications decal. Clean the area, install the decal and cover it
with a clear plastic decal shield.
PART NUMBER

PART NAME

CLASS

E3FZ-12A335-B

Octane Rod

BM

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP12335B84
TIME:

0.3 Hr. DLR. CODING: Basic Part No. DRIVE Code: K7

All Technical Service Bulletins for Distributor Advance Unit: > < Spark Plug/Coil Wire - Resistance, Manual Correction|Page 1988