ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Seat Belt - Does Not Retract In Freezing Weather|Page 6478 > < Front Seat Belt - Does Not Retract In Freezing Weather|Page 6472
Page 1
background image

Seat Belt Retractor: All Technical Service Bulletins
Front Seat Belt - Does Not Retract In Freezing Weather

Article No. 86-1-2

SEAT BELT - FRONT - DOES NOT RETRACT IN FREEZING WEATHER

FORD 1985 LTD

LINCOLN-MERCURY 1985 MARQUIS

On 1985 LTD/Marquis vehicles under freezing conditions, the seat belt plunger in the "B" pillar could freeze/jam if water has entered the mechanism,
and not release the seat belt retracting mechanism when the door is opened. To service this condition, a newly designed plunger seal is now available.
Installation must be performed as follows:

^

Clean the painted surface at the "B" pillar around the seat belt plunger with isopropyl alcohol.

^

Insert the foam seal over an index finger and depress the foam with a thumb to allow paper backing to be peeled off.

Front Seat Belt - Does Not Retract In Freezing Weather|Page 6478 > < Front Seat Belt - Does Not Retract In Freezing Weather|Page 6472