ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Stabilizer Bar - 4-Door-5-Door > < Rear Lower Arm - 4-Door-5-Door
Rear Suspension - Front Lower Arm—4-Door/5-Door Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.
  1. Remove the fuel tank. For additional information, refer to Section  310-01A Fuel Tank and Lines / 310-01B Fuel Tank and Lines.

  1. Detach the stabilizer bar link from the front lower arms.

  1. Remove the front lower arm to wheel knuckle bolt.

  1. Remove the front lower arm.

Installation

  1. NOTE:
    NOTE:The final tightening of the rear suspension components should be carried out with the vehicle on its wheels.
    To install, reverse the removal procedure.

Stabilizer Bar - 4-Door-5-Door > < Rear Lower Arm - 4-Door-5-Door