ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
308-02 Clutch Controls|Specifications > < Clutch Master Cylinder

Mondeo 1997 (08.1996-09.2000)

Clutch Controls - Clutch Slave Cylinder Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Special Tool(s)

Installer, differential bearing

205-062 (15-025A)
Materials
Name
Specification
Sealant, slave cylinder
ESK-M4G269-A 

Removal
  1. Disconnect the slave cylinder high pressure pipe from the transmission.
    1. Remove the dust cover.
    1. Remove the retaining clip.
    1. Disconnect the quick-release coupling and detach the slave cylinder high pressure pipe.
  1. Remove the transmission.For additional information, refer to Section  308-03 Manual Transmission/Transaxle.

  1. Undo the clutch slave cylinder.

  1. NOTE:
    NOTE:Discard the clutch slave cylinder.
    Remove the clutch slave cylinder (with release bearing).

Installation
  1. NOTE:
    NOTE:Install a new clutch slave cylinder.
    Install the slave cylinder using a new seal and slave cylinder sealant.
  1. Install the transmission.For additional information, refer to Section  308-03 Manual Transmission/Transaxle.

  1. NOTE:
    NOTE:Make sure that the retaining clip is seated correctly.
    Connect the slave cylinder high pressure pipe to the transmission.
    1. Install the retaining clip.
    1. Connect the high pressure pipe quick release coupling.
    • Install the dust cover.
  1. Bleed the hydraulic clutch system.

308-02 Clutch Controls|Specifications > < Clutch Master Cylinder