Removal and Installation Removal | -
Disconnect the four electrical connectors. | | -
Withdraw the wiring harness. - Detach the cable guide grommet (three sprung locators) to allow the wiring harness to be withdrawn.
| | -
Remove the luggage compartment lid hinge wiring cover trim. | | -
Using a suitable marker pen, mark the position of the luggage compartment lid hinges. | | -
Remove the luggage compartment lid. - With the aid of another technician remove the hinge bolts from each side.
| Installation | -
NOTE:Align the luggage compartment lid to the position markings before fully tightening the hinge bolts on both sides. To install, reverse the removal procedure. | | |