In-vehicle Repair Special Tool(s) | Universal Flange Holding Wrench 205-072 (15-030A) | | Adapter for 205-072 250-072-01 | Removal | -
Remove the timing chain. For additional information, refer to: Timing Chain (303-01A Engine - 1.8L Duratec-SCi (MI4), In-vehicle Repair). | | -
Remove the oil pan. For additional information, refer to: Oil Pan (303-01A Engine - 1.8L Duratec-SCi (MI4), In-vehicle Repair). | | -
Remove the oil pump chain guide. | | -
Remove the oil pump chain tensioner. | | -
Using the special tools, loosen the oil pump sprocket retaining bolt. | | -
Remove the oil pump chain. - Remove the oil pump sprocket retaining bolt.
- Remove the oil pump chain and the oil pump sprocket.
| Installation | -
NOTE:Install a new oil pump gasket. Install the oil pump. - Tighten the bolts in the sequence shown in two stages.
| | -
Install the oil pump chain. - Install the oil pump chain and the oil pump sprocket.
- Install the oil pump sprocket retaining bolt.
| | -
Using the special tool, tighten the oil pump sprocket retaining bolt. | | -
Install the oil pump chain tensioner. | | -
Install the oil pump chain guide. | | -
Install the oil pan. For additional information, refer to: Oil Pan (303-01A Engine - 1.8L Duratec-SCi (MI4), In-vehicle Repair). | | -
Install the timing chain. For additional information, refer to: Timing Chain (303-01A Engine - 1.8L Duratec-SCi (MI4), In-vehicle Repair). | | |