In-vehicle Repair Name Specification Silicone Sealant WSE-M4G323-A4 Removal | -
Remove the upper intake manifold. For additional information, refer to: Upper Intake Manifold (303-01D Engine - 3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6), In-vehicle Repair). | | -
Disconnect the right-hand cylinder head spark plug electrical connectors. - Detach the cable bracket.
| | -
Detach the front wiring harness bracket from the right-hand valve cover. | | -
Detach the wiring rail from the right-hand valve cover. | | -
Detach the positive crankshaft ventilation (PCV) hose from the right-hand valve cover. | | -
NOTE:Remove the right-hand valve cover retaining bolts in the sequence shown. Remove the right-hand valve cover. | Installation | -
Clean the mating faces of the cylinder head and the right-hand valve cover with a clean, lint free cloth. - Apply sealant to the mating faces of the cylinder head.
| | -
NOTE:Install a new valve cover gasket. Install the right-hand valve cover. - Tighten the valve cover retaining bolts in the sequence shown.
| | -
Attach the positive crankshaft ventilation (PCV) hose to the right-hand valve cover. | | -
Attach the wiring rail to the right-hand valve cover. | | -
Attach the front wiring harness bracket to the right-hand valve cover. | | -
Connect the right-hand cylinder head spark plug electrical connectors. - Attach the cable bracket.
| | -
Install the upper intake manifold. For additional information, refer to: Upper Intake Manifold (303-01D Engine - 3.0L Duratec-SE (VE6)/3.0L Duratec-ST (VE6), In-vehicle Repair). | | |