ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
309 Exhaust System > < Gearshift Linkage

Mondeo 2001 (10.2000-02.2007)

Manual Transmission/Transaxle External Controls - Vehicles With: 6-Speed Manual Transmission (MMT6) - Gearshift Cables Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal
  1. Remove the air cleaner.
    1. Disconnect the positive crankcase ventilation (PCV) hoses.
    1. Disconnect the mass air flow (MAF) sensor electrical connector.
    1. Detach the hose clamp from the air cleaner outlet pipe.

  1. Detach the gearshift cables from the transaxle.
    1. Detach the gearshift cable and the selector cable from the gearshift mechanism.
    1. Detach the cables from the bracket, press the locking tabs.
  1. Remove the floor console. For additional information, refer to Section  501-12 Instrument Panel and Console.
  1. Remove the gearshift linkage.
    For additional information, refer to Gearshift Linkage in this section.

  1. CAUTION:
    CAUTION:Do not bend or kink the gearshift cables.
    NOTE:
    NOTE:Cut the carpet and the insulation pad to gain access to the gearshift cable bushing.
    Remove the gearshift cables.

Installation

  1. To install, reverse the removal procedure.
  1. Adjust the gearshift cables. For additional information, refer to Section  308-00 Manual Transmission/Transaxle and Clutch - General Information.

309 Exhaust System > < Gearshift Linkage