Ford Workshop Service and Repair Manuals

NOTE:Select special tool to suit the line diameter. Fit the special tool. Fit the special tool so that the inner collar can be guided into the clamping spring.

Press the special tool into the clamping spring.

Disconnect the refrigerant line. Discard the O-ring seals.

Connect the refrigerant line. Check the clamping spring for damage. Carefully pull out any damaged clamping springs using a thin piece of wire and install new one.

NOTE:Clean the connections using refrigerant oil and a lint-free cloth. Press the indicator ring into the clamping spring.

NOTE:Install new refrigerant line O-ring seals. NOTE:Coat the refrigerant line O-ring seals in clean refrigerant oil prior to installation. Connect the refrigerant lines. Check that the clamping spring engages correctly.