ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

General Procedures|Removal and Installation > < Headlamp Masking - Vehicles Without: High Intensity Discharge Headlamps
Exterior Lighting - Headlamp Masking—Vehicles With: High Intensity Discharge Headlamps Mondeo 2001 (10/2000-02/2007)
General Procedures

  1. Remove the headlamp assemblies.
    For additional information, refer to Headlamp Assembly in this section.

  1. Detach the headlamp assembly rear cover.
    1. Remove the retaining screws.
    1. Pull up the locking tab.

  1. Turn the alignment lever.
    1. Normal position ""0”
    1. Travel position ""T”

  1. Install the headlamp assembly rear cover.
    1. Push down the locking tab.
    1. Install the retaining screws.
  1. Install the headlamp assemblies.
    For additional information, refer to Headlamp Assembly in this section.

General Procedures|Removal and Installation > < Headlamp Masking - Vehicles Without: High Intensity Discharge Headlamps