ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Headlamp Assembly > < High Beam Headlamp Bulb - Vehicles With: High Intensity Discharge Headlamps
Exterior Lighting - Headlamp Leveling Sensor—Vehicles With: High Intensity Discharge Headlamps Mondeo 2001 (10/2000-02/2007)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the headlamp levelling sensor electrical connector (rear sensor shown).

  1. Disconnect the connecting rod (rear sensor shown).

  1. Remove the headlamp levelling sensor (rear sensor shown).

Installation

  1. NOTE:
    NOTE:After installing the headlamp levelling sensor the headlamp levelling system has to be intialized with WDS.
    To install, reverse the removal procedure.

Headlamp Assembly > < High Beam Headlamp Bulb - Vehicles With: High Intensity Discharge Headlamps