ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
General Procedures|Removal and Installation > < Glass, Frames and Mechanisms

Mondeo 2001 (10.2000-02.2007)

Glass, Frames and Mechanisms - Door Window Motor Initialization Mondeo 2001 (10/2000-02/2007)
General Procedures

WARNING:
WARNING:The door window anti-trap function will not operate during the door window motor initialization procedure. Make sure that the door window opening is free of all foreign material. Failure to follow this instruction may result in personal injury.
NOTE:
NOTE:After the battery has been disconnected it is necessary to initialize each door window motor separately.
  1. Press the power window control switch close button until the door window is fully closed and hold the button in the close position for a further second.
  1. Release the power window control switch close button and press again two or three more times, for one second each time.
  1. Press the power window control switch open button until the door window is fully open.
  1. Briefly press the power window control switch close button to the second detent and release the button.
    • If the door window does not close automatically, repeat the complete procedure.
  1. Repeat the door window motor initialization for each door window motor.

General Procedures|Removal and Installation > < Glass, Frames and Mechanisms