Diagnosis and Testing Refer to Wiring Diagrams Section 501-14, for schematic and connector information. Inspection and Verification - Verify the customer concern.
- Visually inspect for obvious signs of mechanical or electrical damage.
Visual Inspection Chart Mechanical | Electrical | - Misaligned door(s), hood, liftgate, tailgate, luggage compartment and hood
- Door latch(es)
- Liftgate exterior release switch
- Actuating rod(s)
- Exterior door handle(s)
- Door latch remote control(s)
- Door lock cylinder
- Cable(s)
| - Fuse(s)
- Wiring harness
- Electrical connector(s)
- Door latch actuator(s)
- Remote transmitter batteries
- Vehicle battery
- Remote transmitter
- Door lock switch(es)
- Generic electronic module (GEM)
| - If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the cause is not visually evident, verify the symptom and refer to WDS to diagnose the system.
|