Removal and Installation Special Tool(s) | 204-159 Lever, Wheel Knuckle | | 204-605 Separator, Lower arm-ball joint | | 204-607 Remover, Ball joint | | 204-609 Protection Cap, Ball Joint Gaiter | Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Cowl Panel Grille (501-02, Removal and Installation). | | -
Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | Vehicles with dynamic suspension All vehicles | -
-
WARNING:Make sure that no load is placed on the brake hose. Torque: 200 Nm | | -
WARNING:This step requires the aid of another technician. Torque: 35 Nm | Installation | -
To install, reverse the removal procedure. | | -
Refer to: Front Toe Adjustment (204-00, General Procedures). | |