ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump to Quick Release Coupling Pressure Line - 2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4) > < Power Steering Pump - 1.8L Duratorq-TDCi (Lynx) Diesel

Mondeo 2007.5 (02.2007-)

Power Steering - Power Steering Pump to Quick Release Coupling Pressure Line—1.6L Duratec-16V Ti-VCT (Sigma) Mondeo 2007.5 (02/2007-)
Removal and Installation

Special Tool(s)
308-440
Disconnect Tool, Hydraulic Line

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Raise and support the vehicle.
    Refer to: Jacking (100-02 Jacking and Lifting, Description and Operation).
    Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

  1. WARNING:
    WARNING:Be prepared to collect escaping fluids.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Special Tool(s): 308-440
    Torque: 24 Nm
  1. Lower the vehicle.

  1. Torque: 24 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Fill the power steering system.
    Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures).
  1. Bleed the power steering system.
    Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures).

Power Steering Pump to Quick Release Coupling Pressure Line - 2.0L Duratec-HE (MI4)-2.3L Duratec-HE (MI4) > < Power Steering Pump - 1.8L Duratorq-TDCi (Lynx) Diesel