ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Power Steering Pump to Quick Release Coupling Pressure Line - 2.5L Duratec (VI5) > < Power Steering Pump to Quick Release Coupling Pressure Line - 1.6L Duratec-16V Ti-VCT (Sigma)

Mondeo 2007.5 (02.2007-)

Power Steering - Power Steering Pump to Quick Release Coupling Pressure Line—2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4) Mondeo 2007.5 (02/2007-)
Removal and Installation

Special Tool(s)
308-440
Disconnect Tool, Hydraulic Line

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Right-hand headlamp.
    Refer to: Headlamp Assembly (417-01A Exterior Lighting, Removal and Installation).

  1. WARNING:
    WARNING:Be prepared to collect escaping fluid.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Torque: 24 Nm

  1. Torque: 10 Nm

  1. WARNING:
    WARNING:Be prepared to collect escaping fluid.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Special Tool(s): 308-440

Installation

  1. To install, reverse the removal procedure.
  1. Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures).
  1. Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures).

Power Steering Pump to Quick Release Coupling Pressure Line - 2.5L Duratec (VI5) > < Power Steering Pump to Quick Release Coupling Pressure Line - 1.6L Duratec-16V Ti-VCT (Sigma)