ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Steering Gear to Quick Release Coupling Return Line - LHD > < Quick Release Coupling to Steering Gear Pressure Line - RHD

Mondeo 2007.5 (02.2007-)

Power Steering - Quick Release Coupling to Power Steering Fluid Cooler Return Line—2.5L Duratec (VI5) Mondeo 2007.5 (02/2007-)
Removal and Installation

Special Tool(s)
307-242
Remover, Transmission Fluid Cooler

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Right-hand headlamp assembly.
    Refer to: Headlamp Assembly (417-01A Exterior Lighting, Removal and Installation).

  1. Torque: 10 Nm

  1. Torque: 110 Nm

  1. WARNING:
    WARNING:Be prepared to collect escaping fluid.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Special Tool(s): 307-242

  1. WARNING:
    WARNING:Be prepared to collect escaping fluid.
    CAUTION:
    CAUTION:Make sure that all openings are sealed.
    Special Tool(s): 307-242

Installation

  1. To install, reverse the removal procedure.
  1. Refer to: Power Steering System Filling (211-00 Steering System - General Information, General Procedures).
  1. Refer to: Power Steering System Bleeding (211-00 Steering System - General Information, General Procedures).

Steering Gear to Quick Release Coupling Return Line - LHD > < Quick Release Coupling to Steering Gear Pressure Line - RHD