ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Oil Pump > < Cylinder Head

Mondeo 2007.5 (02.2007-)

Engine - 2.3L Duratec-HE (MI4) - Oil Pan Mondeo 2007.5 (02/2007-)
Removal and Installation

Materials
Name
Specification
Engine Oil - 5W-30
WSS-M2C913-B
Silicone Sealant
WSE-M4G323-A4

Removal
  1. Refer to: Air Cleaner (303-12B Intake Air Distribution and Filtering - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).
  1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

  1. Loosen: 5 turn(s)

  1. Loosen: 5 turn(s)

  1. NOTE:
    NOTE:The seal is to be reused unless damaged.

  1. Refer to: Starter Motor (303-06B Starting System - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).

Installation
  1. Material: Silicone Sealant

  1. Material: Silicone Sealant

  1. NOTE:
    NOTE:Only tighten the bolts finger tight at this stage.

  1. Torque: 10 Nm

  1. Torque: 25 Nm

  1. Torque: 48 Nm

  1. Torque: 48 Nm

  1. Torque: 48 Nm

  1. Torque: 36 Nm
  1. Refer to: Starter Motor (303-06B Starting System - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).

  1.  
    1. Torque: 48 Nm
    1. Torque: 80 Nm

  1. Torque: 25 Nm

  1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
  1. Refer to: Air Cleaner (303-12B Intake Air Distribution and Filtering - 2.0L Duratec-HE (MI4)/2.3L Duratec-HE (MI4), Removal and Installation).

  1. Fill the engine with engine oil.
    Refer to: Specifications (303-01C Engine - 2.3L Duratec-HE (MI4), Specifications).
    Material: Engine Oil - 5W-30

Oil Pump > < Cylinder Head