ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Front Seal > < Valve Clearance Adjustment

Mondeo 2007.5 (02.2007-)

Engine - 2.5L Duratec (VI5) - Intake Manifold Mondeo 2007.5 (02/2007-)
Removal and Installation

Removal

NOTE:
NOTE:Removal steps in this procedure may contain installation details.
  1. Refer to: Petrol Fuel System Health and Safety Precautions (100-00 General Information, Description and Operation).
  1. Refer to: Fuel System Pressure Release (310-00 Fuel System - General Information, General Procedures).
  1. Refer to: Battery Disconnect (414-01 Battery, Mounting and Cables, General Procedures).
  1. Refer to: Air Cleaner (303-12C Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation).

  1. Torque: 10 Nm

  1. Torque: 10 Nm

  1. Torque: 10 Nm

  1. Torque: 10 Nm

  1. Torque: 24 Nm

Installation

  1. To install, reverse the removal procedure.
  1. Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Crankshaft Front Seal > < Valve Clearance Adjustment