Removal Special Tool(s) | 303-122 Lifting Bracket, Engine | General Equipment Hose clamp remover/installer Hydraulic jib crane Mounting table set | - Remove the following items:
-
Refer to: Air Cleaner (303-12D Intake Air Distribution and Filtering - 1.8L Duratorq-TDCi (Lynx) Diesel, Removal and Installation). -
Refer to: Battery (414-01 Battery, Mounting and Cables, Removal and Installation). -
Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation). | | -
Refer to: Cooling System Draining, Filling and Bleeding (303-03D Engine Cooling - 1.8L Duratorq-TDCi (Lynx) Diesel, General Procedures). | | -
Refer to: Accessory Drive Belt (303-05E Accessory Drive - 2.0L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | - Remove the following items:
-
Refer to: Catalytic Converter (309-00E Exhaust System - 2.0L Duratorq-TDCi (DW) Diesel, Removal and Installation). -
Refer to: Front Halfshaft RH (205-04 Front Drive Halfshafts, Removal and Installation). Refer to: Front Halfshaft LH (205-04 Front Drive Halfshafts, Removal and Installation). -
Front Subframe. Refer to: Front Subframe (502-00 Uni-Body, Subframe and Mounting System, Removal and Installation). -
Refer to: Starter Motor (303-06E Starting System - 2.0L Duratorq-TDCi (DW) Diesel, Removal and Installation). | | -
Refer to: Quick Release Coupling (310-00 Fuel System - General Information, General Procedures). | | -
WARNING:Make sure that the engine and transmission assembly is on wooden blocks and secured with suitable retaining straps. | | -
CAUTION:Make sure that no components catch when lowering the engine. Refer to: Lifting (100-04 Noise, Vibration and Harshness, Description and Operation). | Vehicles with automatic transmission | -
Refer to: Transmission Fluid Drain and Refill (307-01 Automatic Transmission/Transaxle - Vehicles With: 6-Speed Automatic Transmission (AWF21), General Procedures). | | -
CAUTION:Gearshift cables must not be kinked or bent. | Vehicles with manual transmission | -
CAUTION:Gearshift cables must not be kinked or bent. | | -
CAUTION:If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. | | |