Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | -
Refer to: Petrol Fuel System Health and Safety Precautions (100-00 General Information, Description and Operation). | | -
Refer to: Fuel System Pressure Release (310-00 Fuel System - General Information, General Procedures). | | -
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Refer to: Air Cleaner (303-12 Intake Air Distribution and Filtering - 2.5L Duratec-ST (VI5), Removal and Installation). | | -
CAUTION:Make sure that the inside of the pipe ends are clean and free of oil residue. Torque: 4 Nm | | -
CAUTION:Make sure that the inside of the pipe ends are clean and free of oil residue. | | -
CAUTION:Make sure that the inside of the pipe ends are clean and free of oil residue. | Installation | -
To install, reverse the removal procedure. -
Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | | |