ford Workshop Repair Guides

Ford Mondeo Workshop Service and Repair Manuals

ABOUT US
Fuel System Pressure Check - 1.6L Duratec-16V Ti-VCT (Sigma) > < Fuel System Pressure Check - 2.5L Duratec (VI5)

Mondeo 20075 Fuel System Pressure Release

Fuel System - General Information - Fuel System Pressure Release Mondeo 2007.5 (02/2007-)
General Procedures

Release

WARNING:
WARNING:Refer to: Petrol Fuel System Health and Safety Precautions (100-00, Description and Operation).
  1. Remove the fuel pump and sender unit fuse.
  1. Start the engine and allow it to idle until the engine stalls.
  1. Crank the engine for approximately five seconds to make sure that the fuel rail pressure is released.
  1. Install the fuel pump and sender unit fuse.

Fuel System Pressure Check - 1.6L Duratec-16V Ti-VCT (Sigma) > < Fuel System Pressure Check - 2.5L Duratec (VI5)