| Removal and Installation Removal CAUTION:Modules must not be swapped between vehicles. CAUTION:If a new electric box is installed, make sure that the assignments are the same as on the removed electric box. | | -
Refer to: Batterie abklemmen (414-01, General Procedures). | Installation | | -
To install, reverse the removal procedure. | | | -
Programme the GEM. Refer to: Einbau von programmierbaren Modulen (418-01 Modul-Konfiguration, General Procedures). | | | -
Configure the GEM. Refer to: Modul-Konfiguration (418-01 Modul-Konfiguration, General Procedures). | | | -
Programme the key of the passive anti-theft system (PATS). Refer to: Schlüssel- und Fernbedienungsprogrammierung mit dem Diagnosegerät (419-01 Elektronische Wegfahrsperre, General Procedures). | | | -
Program the remote unlocking remote control. Refer to: Fernbedienung - Fernentriegelung programmieren (501-14 Türgriffe, Schlösser, Verriegelungen und Betätigungsmechanismen, General Procedures). | | |
