Mustang L4-140 2.3L SOHC (1982)
Figure 10
2.
Add the rear lamp lens retaining clips, 389611-S100 and D9ZZ-13539-A, to the lamp body butyl seal channel. Refer to Figure 10 for accurate clip
location. Install the D9ZZ-13539-A clips in the existing locations where the old/used clips were removed.
3.
Firmly press and hold for ten seconds the lens into position, assuring that the butyl tape seals the lens to the body around the entire perimeter.
CAUTION: AVOID APPLYING PRESSURE TO THE MIDDLE OF THE LENS TO KEEP FROM BREAKING THE LENS.
