ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Filler Door Override Cable - Hangs Up|Page 8142 > < Interior Lamps/Buzzers - Improper Operation|Page 8133
Page 1
background image

Fuel Door Release Cable: Customer Interest
Fuel Filler Door Override Cable - Hangs Up

Article No. 84-10-1

DOOR - FUEL FILLER - MANUAL OVERRIDE CABLE - HANGS UP
-

MODELS WITHOUT LUGGAGE COMPARTMENT TRIM

FORD 1983-84 LTD, MUSTANG

LINCOLN-MERCURY 1983-84 MARQUIS

FIGURE 1

This concern is caused by the manual override cable being pulled in a direction 90~ to the fuel filler door latch. The finger (retaining cable) on the latch
housing (designed to keep the override cable in the slot in the end cap), may break when the cable is pulled in a direction 90~ to the latch, allowing the
cable to hang-up between the housing and the end cap. This results in an unlocked fuel filler door. To service this concern, install a tie strap (part no.
95832-S) around both the override cable and the main cable per Figure 1.

NOTE:

Until such time as the old design service part stock is depleted, it will be necessary when installing a new latch assembly to check the housing
for the reinforced retaining finger (See Figure 1). If the latch housing does not have the "T" shaped reinforced retaining finger, a tie strap must
be installed before installing the new latch assembly.

Fuel Filler Door Override Cable - Hangs Up|Page 8142 > < Interior Lamps/Buzzers - Improper Operation|Page 8133