Mustang L4-140 2.3L Turbo VIN W FI (1984)
Figure 26
15.
Seat the weatherstrip in the "B" pillar retainer using a plastic squeegee or similar tool.
Figure 27
16.
Push the weatherstrip retaining pin into the hole at the bottom of the "B" pillar. Glue weatherstrips together with weatherstrip adhesive.
NOTE:
Check the mating of the door weatherstrip to the "B" pillar weatherstrip for fit to be sure a good seal is made and the weatherstrip on the "B"
pillar is not collapsed at the molded end. If necessary, redrill the pin hole to get the proper fit.