Mustang L4-140 2.3L Turbo VIN W FI (1984)
Figure 16
In the event of customer concerns of oil consumption, the crankcase vent tube connector should be serviced as follows (Refer to Figure 16):
1.
Disconnect the vent tube from the fitting.
2.
Using a 1/4" drill bit as a GO/NO GO gage, insert into fitting. If GO, fitting is okay.
3.
If NO GO, remove fining and enlarge through the hole in the fitting with a 9/32 inch drill.
4.
Reinstall the fitting and torque to 24-35 N-m (18-26 ft.lbs.).
5.
Connect the vent tube to the fitting 11-16 N-m (8-12 ft.lbs.). If the fining requires replacement, order part number E3ZZ-6A668-A.
PART NUMBER
PART NAME
CLASS
E3ZZ-6A668-A
Connector (Vent Tube)
C