Mustang L4-140 2.3L VIN A 1-bbl (1983)
9.
Raise vehicle on hoist and check that all rivets are properly seated. If a rivet is bad, drill it out and install a new rivet.
10.
To install the lower reinforcement (E5ZZ-6111248- A), refer to Procedure "A", Steps 2 through 11, and return to Step 11 of this procedure when
"A" is completed.
11.
Install floor wiring, floor sound deadener, carpet, rear seat cushion and seat belts.
NOTE:
Torque seat belt bolts to 22-32 ft.lbs. (30-44 N-m).
12.
Install seat and seat track assembly and torque floor pan attachments to 18-32 ft.lbs. (25-44 N-m).
13.
Check seat tracks and seat belts for proper operation.
PART NUMBER
PART NAME
CLASS
E5ZZ-6111248-A
Reinforcement Front Floor
C
Pan Seat Track - L.H.
E5ZZ-6111248-B
Reinforcement Front Floor
C
Pan Seat Track - R.H.
E5ZZ-61111A45-A
Reinforcement - Floor
C
Pan - Except Convertible
E5ZZ-66111A45-A
Reinforcement - Floor
C
Pan - Convertible
383798-S7-8
Rivet - 3/16" x .50
S
Blind Oval
382602-S100
Rivet - 3/16" x .40
S
Blind Oval
D8AZ-19515-B
Super Seal Anti-Corrosion
A
Compound (16 Oz. Can)
OTHER APPLICABLE ARTICLES: Supersedes 86-18-1, 84-3-4, 84-3-45, 83-14-2
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP11135A86 - Driver's side lower - includes inspection
TIME:
1.6 Hrs.
OPERATION: SP11135B86 - Driver's side lower and upper - includes inspection
TIME:
2.4 Hrs.
OPERATION: SP11135C86 - Passenger's side lower
-
includes inspection
TIME:
1.6 Hrs. DLR. CODING: Basic Part No. 7011135 - Code: 01
