Mustang L4-140 2.3L VIN A 1-bbl (1983)
7.
Remove the timing belt cover.
8.
Loosen both timing belt tensioner attaching bolts using Torque Wrench Adapter T81P-6254-A or equivalent.
9.
Pry the belt tensioner away from the belt as far as possible and tighten one of tensioner attaching bolts.
10.
Remove the camshaft sprocket.
11.
Remove the seal.
Installation
1.
Install the camshaft seal using Seal Installer T81P-6292-A or equivalent.
2.
Install the camshaft sprocket.
3.
Install the timing belt as outlined under timing belt tensioning and replacement procedure.
Crankshaft Oil Seal - Rear
Removal
1.
Remove the transaxle as outlined in Section 16-35, 16-37 or 17-25.
2.
Remove the rear cover plate.
3.
Remove the flywheel.