ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Output Shaft, M/T > < Gear Sensor/Switch, M/T|Locations

Mustang L4-140 2.3L VIN A 1-bbl (1983)

Page 1
background image

Input Shaft: Service and Repair

1.  Remove roller bearings from input shaft if not done previously.
2.  Using a suitable press, remove input gear from bearing.
3.  Reverse procedure to assemble.

Output Shaft, M/T > < Gear Sensor/Switch, M/T|Locations