Mustang V6-232 3.8L (1985)
II. E3FZ-5A231-C
Air Tube Clamp
BM
2.31 d/
N800064-S2
Stud (4-Req'd)
BM
5.34 e/
387039-S7
Nut (4-Req'd)
BR
2.86 (Pkg. of 4)
55914-S2
Screw (5-Req'd)
BG
1.28 f/
Form (FPS-8262)
Decal Authorized
--
No-charge. Order as you
Modifications
would any service part.
a/
Based on $5.19/pkg of 3
b/
Based on $1.83/pkg of 4
c/
Based on $3.18/pkg of 4
d/
Based on $4.62/pkg of 2
e/
Based on $2.67/pkg of 2
f/
Based on $3.85/pkg of 15
SPECIAL CLAIM
The claim Form 1864 will not accommodate all of the parts required for
PREPARATION
vehicle modification. Prepare claim forms as follows:
INSTRUCTIONS
1st Line Entry (See I Above)
Insert the appropriate catalyst and Y-pipe assembly part number and dealer price.
2nd Line Entry (See II Above)
Insert "OSP" for part number and price totals for remaining parts used for modification.
RETURN PARTS
Return all removed catalytic convertor parts. Refer to Warranty and
Policy Manual, Section 7.0-7.
LABOR
Base Labor Time
TIMES
Replace the Exhaust System
Catalytic Converter and
Y-Pipe Assembly, and Attach
Authorized Modifications
Decal
1.1 Hr.
Insert in Box
"B" of Form 1864
Administrative Allowance Time (Additive to Above)
Administrative Allowance . . . . . . . . . . . . . . . . 0.1 Hr.
The 0.1 hour administrative allowance must be added before inserting the total labor time in Box "B" of the Form 1864.
REPORTING
Only the Form 1864 will be accepted for reimbursement under this program.
COMPLETIONS
Upon completion of the required service, the Form 1864 must be completely
filled out and signed by authorized dealer personnel.
CLAIM
The claims must be entered through the Direct Warranty Entry (DWE) system.
SUBMISSION
Dealers without DWE capability must mail the second copy of the Form 1864
for reimbursement. Should your dealership receive pre-printed Forms 1864 with a seven digit claim number, you must drop the
first digit and enter only the last six digits. You must sight verify the claim number for accuracy. It is important that all claims be
filed for all completed units so that you will be reimbursed and our records will show completion.
REMEMBER THAT CLAIM FORMS FOR THIS RECALL REQUIRE SPECIAL PREPARATION. SEE "SPECIAL CLAIM
PREPARATION INSTRUCTIONS" SECTION ABOVE.
FPSD
Any problems encountered with this recall should be discussed with your
ASSISTANCE
FPSD Service Zone Manager.
TECHNICAL INSTRUCTIONS FOR EMISSIONS RECALL 88E73
REPLACING THE EXHAUST SYSTEM CATALYTIC CONVERTOR AND Y-PIPE ASSEMBLY
Replace the existing exhaust system catalytic convertor and Y-pipe assembly. See the attaching parts listed in the "Parts Ordering" section of the dealer
letter and the following table: