Mustang V6-232 3.8L VIN 3 TBI (1984)
Figure 83
3.
If the alignment mark from the reinforcement panel procedure is present, align the mark with beltline moulding.
Have a second technician sit in the front seat with the necessary tools to tighten the adjustments and close the door.
Figure 84
4.
Position the glass in the door opening and hold it in place as close as possible to the correct position in relation to the weatherstrips.
Apply a slight pressure at the top of the glass while the second technician tightens the fore and aft tilt adjustment.
The adjustment is accessible through the opening between the door glass and inner door panel.
