Mustang V6-232 3.8L VIN 3 TBI (1984)
Figure 14
5.
Remove the two caliper locating pins and lubricate with D7AZ-19590-A or D7AZ-19A331-A on the pin surface where the outer brake shoe slides
(Figure 14). Care should be taken so that the lubricant does not get on the brake linings, the rotor braking surface, or the pin threads.
6.
Install the two caliper locating pins and torque to 64 Nm (50 ft.lb.).
7.
Install the wheel and tire assembly.
8.
Lower the vehicle from the hoist.
9.
Prior to moving the vehicle, the brake pedal should be depressed several times to position the brake shoes.
ART NUMBER
CLASS
D7AZ-19590-A
Disc Brake Caliper
A
Slide Grease
D7AZ-19A331-A
Electrical Connection
A
Silicon Dielectric Grease
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP2296A85
TIME:
0.6 Hr. DLR. CODING: Basic Part No. 2B296 - Code: 41
