ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - No Start Condition|Page 3322 > < EEC IV Processor - False Memory Codes|Page 3316
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine - No Start Condition

Article No. 85-7-12

NO START - EEC IV MODULE SATURATED WITH WATER - R.H. COWL SIDE, WELD SEALER SKIP

FORD 1984-85 MUSTANG

LINCOLN-MERCURY 1984-85 CAPRI

CALIBRATION: All with EEC IV

Water may leak through a sealer skip between the cowl side and upper cowl assembly. Leaking water falls onto EEC IV module resulting in no start
condition. Service by sealing the cowl side. Replace the EEC processor.

Service Procedure for Water Leak From Right Hand Cowl Side of Vehicle

1.

Remove right hand front wheel.

2.

Remove right hand front splash shield. (See Shop Manual Page 47-04-4).

3.

Remove right hand front fender assembly. (See Shop Manual Page 47-04-4).

Figure 16 -Body Caulk

4.

Apply D6AZ-19560-A Body Caulk(Figure 16).

Engine - No Start Condition|Page 3322 > < EEC IV Processor - False Memory Codes|Page 3316