Mustang V6-232 3.8L VIN 3 TBI (1984)
FIGURE 12
3.
Using either Template No. 3 (Figure 11) for Mustang or Template No. 4 (Figure 12) for Capri drill two (2) 1/8" diameter holes in the lower left
hand side of the back panel and install switch using
(2)
screws (Part No. 55978-S45) (Figure 8).
CAUTION: WHEN DRILLING THE MOUNTING HOLES USE A 3/4 INCH DEPTH STOP ON DRILL BIT TO PREVENT DAMAGING THE
